Is your Kenmore 70-pint dehumidifier giving you trouble? You’re not alone. Many people face issues with their dehumidifiers, especially when they rely on them to keep their homes comfortable and moisture-free. A malfunctioning unit can lead to increased humidity, mold growth, and an uncomfortable living environment.
In this article, you’ll find practical solutions to common problems that can cause your dehumidifier to stop working. Whether it’s a simple fix or a more complex issue, you’ll gain insights that can help you troubleshoot effectively. Let’s get your dehumidifier back in shape so you can enjoy a fresher, drier home again.
Key Takeaways
- Common Issues: The Kenmore 70-pint dehumidifier may face problems such as electrical failures, drainage issues, and improper humidity settings that prevent it from functioning effectively.
- Troubleshooting Steps: Resetting the unit, checking the power supply, and inspecting the drain hose are key actions to perform when troubleshooting non-operational issues.
- Maintenance Importance: Regular maintenance, including cleaning the air filter and inspecting the coils, is essential for optimal performance and longevity of the dehumidifier.
- Proper Placement: Ensure the dehumidifier has at least two feet of clearance around it to prevent airflow obstruction, which can lead to overheating and reduced efficiency.
- Drainage Solutions: For continuous drainage systems, regularly check the hose for clogs or kinks to maintain effective moisture removal.
Overview of Kenmore Dehumidifier 70 Pint
The Kenmore 70-pint dehumidifier effectively reduces humidity levels, promoting a healthier indoor environment. It extracts up to 70 pints of moisture from the air daily, making it suitable for spaces up to 1,200 square feet.
Key Features
- Digital Controls: The easy-to-use digital display allows for precise humidity setting adjustments.
- Continuous Drain Option: This feature keeps water flowing without needing constant attention. You can set it to drain into a nearby sink or hose.
- Energy Efficient: Its energy-efficient design can help lower your electricity bills while keeping your home comfortable.
Common Uses
- Basements: Ideal for handling moisture in damp areas like basements.
- Laundry Rooms: Reduces humidity during and after laundry cycles.
- Bathrooms: Helps combat moisture generated from showers and baths.
Maintenance Tips
- Clean the Filter: Check the air filter monthly. Clean or replace it to maintain performance.
- Empty the Tank Regularly: If not using the continuous drain, empty the water tank frequently to prevent overflow.
- Check the Coils: Inspect the coils for dust buildup. Clean them to ensure efficient operation.
- Unit Not Turning On: Check the power supply and ensure the outlet works.
- Not Collecting Moisture: Ensure settings are correct. Look for blockages in the air intake or exhaust.
- Leaking Water: Inspect the water tank for cracks and check the drain hose for kinks or clogs.
These insights ensure that you can make the most of your Kenmore 70-pint dehumidifier for optimal performance and comfort.
Common Issues with Kenmore Dehumidifier 70 Pint
The Kenmore 70-pint dehumidifier can face several common issues that hinder its performance. Understanding these problems allows you to tackle them effectively.
Electrical Problems
Electrical problems often prevent the dehumidifier from starting or functioning correctly. Check these aspects:
- Power Source: Ensure the unit is plugged in securely. Check the outlet by plugging in another device to verify it works.
- Circuit Breaker: Inspect the circuit breaker. If it has tripped, reset it and see if the dehumidifier operates.
- Faulty Components: Look for damaged power cords or internal components. If you spot any wear and tear, consider having a professional inspect the unit for safety.
Drainage Issues
Drainage issues can disrupt moisture removal and lead to water buildup. Address these points:
- Water Tank: Confirm the water tank isn’t full and is seated properly. If it’s full, empty it and check if the unit resumes operation.
- Drain Hose: If you use a continuous drainage system, check the drain hose for clogs or kinks. Clear any obstructions to allow for proper drainage.
- Humidity Level Settings: Ensure your settings align with your environment. If the humidity level is set too high, the unit might not activate.
- Regular Inspection: Examine the air filter every few weeks for dust and debris buildup. Clean or replace it as necessary to improve airflow.
- Cleaning Procedure: Wash reusable filters under running water. If using a disposable filter, replace it according to the manufacturer’s recommendations.
- Airflow: Maintain at least two feet of clearance around the unit to ensure proper airflow. Obstructions can lead to overheating or reduced performance.
Troubleshooting Steps
Follow these troubleshooting steps if your Kenmore 70-pint dehumidifier isn’t working properly. Each section offers actionable insights to help you identify and resolve key issues.
Resetting the Unit
Resetting your unit can fix minor glitches. To reset:
- Unplug the dehumidifier from the power outlet.
- Wait for about 10 minutes to allow any residual power to dissipate.
- Plug the unit back in.
- Turn the unit on and set your desired humidity level.
If the problem persists, proceed to the next steps.
Checking the Power Supply
A stable power supply is essential for your dehumidifier’s operation. To check:
- Ensure the unit is plugged securely into an outlet.
- Inspect the extension cord, if used, for damage or loose connections.
- Check your home’s circuit breaker to ensure the power is on.
- If needed, test the outlet with another device to confirm it’s functioning properly.
If the power supply is fine, investigate further issues.
Inspecting the Hose
A clogged or improperly installed hose can prevent effective drainage. To inspect:
- Check the drain hose for kinks or bends that could obstruct water flow.
- Remove the hose and look for blockages; clean any debris you find.
- Ensure the hose is connected properly to both the unit and the drain source.
- If it’s a continuous drain model, confirm that the hose is positioned correctly for gravity drainage.
By performing these checks, you can effectively diagnose and address the issues with your Kenmore 70-pint dehumidifier.
Maintenance Tips for Optimal Performance
Clean the Air Filter Regularly
Cleaning the air filter is crucial for maintaining efficiency. You should check the filter every month and clean it with warm, soapy water. Rinse it thoroughly and let it dry completely before reinserting it.
Empty the Water Tank Frequently
Empty the water tank once it reaches capacity. If you frequently forget, set a reminder every few days. Keeping the tank empty ensures proper functioning and prevents overflow issues.
Inspect the Coils for Dust Build-Up
Inspect the coils every few months for dust accumulation. Clean them gently with a soft brush or vacuum attachment. Clean coils promote better airflow, enhancing the dehumidifier’s performance.
Check the Drain Hose Regularly
Check the drain hose for clogs or kinks. A blocked hose prevents water from draining properly. If needed, remove the hose and flush it with water to clear any obstructions.
Verify Humidity Settings
Adjust the humidity settings based on the season. Set it lower during humid months and higher during dry periods. You can balance comfort and efficiency with the right settings.
Ensure Proper Placement
Position your dehumidifier away from walls and furniture. An ideal placement allows airflow around the unit. Ensure it’s near a power source and doesn’t obstruct any vents.
Perform Seasonal Maintenance
During seasonal changes, perform a thorough maintenance check. This includes cleaning, checking for damage, and ensuring all components function. Maintain records of your checks for future reference.
Conclusion
Getting your Kenmore 70-pint dehumidifier back in working order doesn’t have to be a hassle. By following the troubleshooting tips and maintenance advice shared, you can tackle common issues and keep your space comfortable and dry.
Remember to stay proactive with regular cleaning and checks to avoid future problems. If you find that your unit still isn’t performing as it should, don’t hesitate to reach out to a professional for help. Keeping your home moisture-free is essential for your comfort and well-being, so take the steps needed to ensure your dehumidifier is always up to the task. You’ve got this!
Frequently Asked Questions
What are common issues with the Kenmore 70-pint dehumidifier?
Common issues include the unit not turning on, not collecting moisture, leaking water, and drainage problems. Troubleshooting these issues often involves checking the power source, inspecting the water tank, and ensuring the filters and coils are clean.
How do I reset my Kenmore dehumidifier?
To reset your dehumidifier, unplug it from the power source, wait for about 10 minutes, then plug it back in. This can help resolve minor glitches and restore normal operation.
What maintenance do I need for my Kenmore dehumidifier?
Regular maintenance includes cleaning the air filter, emptying the water tank frequently, inspecting the coils for dust buildup, and ensuring the drain hose is clear. Seasonal checks are also recommended for optimal performance.
How do I fix drainage issues with my dehumidifier?
First, ensure the water tank isn’t full and check for clogs in the drain hose. Adjust humidity settings as needed and verify that the hose is correctly installed and free of obstructions.
Can I use the Kenmore 70-pint dehumidifier in any room of my house?
Yes, the Kenmore 70-pint dehumidifier is effective in spaces up to 1,200 square feet, making it suitable for basements, laundry rooms, and bathrooms where humidity is typically higher.
Jake Newman is Appliance Mastery’s expert on refrigeration and cooling systems. With over a decade of experience in the appliance repair industry and certification from NASTeC, Jake is a trusted source of knowledge for homeowners who want to troubleshoot and repair their fridges, freezers, and air conditioning units.