Whirlpool Duet Dryer Sensing but Not Starting

Are you facing a frustrating issue with your Whirlpool Duet Dryer? You might be sensing the cycle start, but nothing happens. It’s like the machine has gone into a deep slumber and refuses to budge. You’ve tried all the usual tricks – checking for tripped circuit breakers or blown fuses, making sure the door is properly closed, and even cleaning out lint – but nothing seems to work.

It’s not just you; many users have reported similar problems with their Whirlpool Duet Dryers. This issue can be particularly aggravating as it disrupts your daily routine, leaving you with damp laundry that needs to be dried immediately. Don’t worry; we are here to help! In this article, we will delve deeper into the possible causes of this problem and give you some practical tips on how to fix it. So, let’s roll up our sleeves and get started!

What does it mean when a Whirlpool Duet dryer is “sensing”?

When you start your Whirlpool Duet dryer, the first thing it does is “sense” for moisture levels in the clothes. This process is called the “Sensing” phase and takes a few minutes to complete. The dryer uses two metal strips inside the drum that come into contact with wet clothing. If these strips detect moisture, then the dryer will continue running until all of the clothes are dry.

The sensing mode in a Whirlpool Duet dryer helps to prevent over-drying of clothes and saves energy in the process. It’s an essential function that ensures that your clothes are dried effectively without using too much power. Once the sensing mode has completed, it moves on to the actual drying cycle.

How long does sensing usually take?

The length of time it takes for your Whirlpool Duet dryer to sense depends on several factors, including how many clothes you have loaded into it and how wet they are. Typically, sensing will take anywhere from 2-5 minutes before moving on to the next cycle.

Can you skip the sensing mode?

No, you cannot skip this step as it is an essential part of the drying process. However, if you find that your Whirlpool Duet dryer is stuck in sensing mode or taking longer than usual to sense, there may be an issue that needs troubleshooting.

Why might a Whirlpool Duet dryer be stuck in the sensing mode?

If your Whirlpool Duet dryer is stuck in sensing mode, there could be several reasons why this is happening:

• The moisture sensors might be dirty or covered with lint.
• The control board may need replacing.
• The heating element may be malfunctioning.
• The dryer drum may not be rotating properly.

How can you tell if your Whirlpool Duet dryer is stuck in sensing mode?

When a Whirlpool Duet dryer is stuck in sensing mode, the drying cycle will not progress to the next phase. The dryer will continue to run in the sensing phase for an extended period and not move on to the drying cycle. If this happens, you may want to begin troubleshooting to identify the root cause.

What are some common causes for a Whirlpool Duet dryer not starting after sensing?

If your Whirlpool Duet dryer isn’t starting after finishing the sensing cycle, there could be several reasons:

• The door latch might not be securely closed.
• The control board might have malfunctioned.
• The thermal fuse could have blown out.
• The belt that rotates the drum may have broken or slipped off its track.

What should you do if your Whirlpool Duet dryer refuses to start?

If your Whirlpool Duet dryer won’t start after completing the sensing cycle, there are a few things you can do:

1. Check to make sure that the door is securely latched shut and that nothing is blocking it from closing correctly.
2. Verify that there is power going to your dryer by checking that the circuit breaker hasn’t tripped or blown a fuse.
3. If these two steps don’t work, try unplugging your machine for about 30 seconds before plugging it back in again and trying again.

How can I troubleshoot my Whirlpool Duet dryer to determine why it’s not starting?

If your Whirlpool Duet dryer isn’t starting, try the following troubleshooting steps:

1. Check to ensure that the dryer is firmly plugged into a working electrical outlet.
2. Make sure that the door is securely latched shut and that nothing is blocking it from closing correctly.
3. Verify that there is power going to your dryer by checking that the circuit breaker hasn’t tripped or blown a fuse.
4. If these two steps don’t work, try unplugging your machine for about 30 seconds before plugging it back in again and trying again.
5. If none of the above steps work, you may need to consult with a professional repair service.

What should I do if I suspect my Whirlpool Duet has a faulty heating element?

If you suspect that your Whirlpool Duet has a faulty heating element, you can test it with a multimeter. Start by unplugging your dryer and removing the back panel to access the heating element. Once you’ve located it, use your multimeter to check for continuity between its two terminals.

If there is no continuity, then you’ll need to replace the heating element. You can purchase replacement parts from an authorized dealer or appliance store. If this seems too complex or dangerous for you, it’s best to consult with a professional technician instead.

Are there any DIY fixes for a Whirlpool Duet dryer that won’t start after sensing, or should I call a professional repair service?

While some issues with your Whirlpool Duet dryer may be fixable yourself, others may require professional intervention. Attempting certain repairs on your own could be dangerous and lead to further damage.

If you’re not sure what to do, it’s best to call a professional repair service. They will be able to diagnose the problem and provide you with the best course of action moving forward. Some common DIY fixes include checking for blockages in the dryer vent or cleaning out the lint trap to prevent overheating. However, more complex issues such as a faulty control board or heating element should always be left to professionals.

In conclusion, if your Whirlpool Duet dryer is sensing but not starting, there could be several reasons behind it. It is essential to troubleshoot the issue and identify the root cause to fix the problem effectively.

Frequently Asked Questions about Whirlpool Duet Dryer Sensing but Not Starting

Why wont my Whirlpool dryer start but has power?
If your Whirlpool dryer has power but is not starting, make sure you have selected the correct settings. The dryer control knob must be set to either “Automatic” or “Timed” cycle to begin drying. If the “Wrinkle Reduction” option is chosen on certain models, the dryer will not start immediately.

What does it mean when my Whirlpool dryer says sensing?
The moisture sensor in a Whirlpool dryer keeps track of how wet the clothes are while the dryer is running. When the clothes are dry before the set time is up, the sensor sends a signal to the dryer to stop.

Why won’t my dryer start but has power?
In case your dryer isn’t functioning despite being connected to a power source, verify that there are no power outages, blown fuses, or tripped circuit breakers in your home. Before using the dryer, check that all fuses are safe and secure.

When I push the start button on my dryer nothing happens?
If the dryer isn’t turning on, there could be multiple explanations, ranging from a door switch that isn’t registering the door as being closed to a malfunctioning electronic control board. Additional factors that may be contributing to the issue include a damaged power cord, a defective push-to-start switch, or a faulty timer.

How do I fix my dryer sensing?
If the timer on your dryer’s auto cycle or sensor dry is quickly counting down to “off,” there may be a problem with the sensor bars, which are two metal strips located near the lint screen. Cleaning them with soap and water can help remove any buildup that may be affecting their function. This was suggested on July 12, 2014.

Why is my dryer beeping and not starting?
Continuous beeping from the dryer is caused by a faulty control panel and cannot be fixed by simply resetting or unplugging the device. To resolve the issue, the control board needs to be replaced. However, if you have skills in tools and electronics, you can save money on a service call by fixing the problem on your own.