Pressing the reset button on a Frigidaire side by side ice maker clears sensor errors and restores ice production in most cases. Owners locate the button inside the unit housing and hold it for several seconds to complete the cycle.
The procedure uses common household tools and follows a fixed sequence that avoids damage to the control board. Further inspection of the water supply line and evaporator fan prevents the same fault from returning after reset.
Frigidaire Side by Side Reset Tool Kit
Frigidaire side by side models require a short list of basic items before any reset attempt begins. These tools allow safe access to the ice maker without forcing panels or risking electrical shorts. Preparation with the correct supplies reduces time spent on the job and prevents incomplete resets that leave the unit in error mode.
A standard kit covers the needs of most owners.
| Item | Purpose |
|---|---|
| Phillips screwdriver | Remove access panels |
| Needle nose pliers | Grip small connectors |
| Multimeter | Test voltage at the control board |
| Flashlight | Illuminate the reset button area |
Prepare Frigidaire Refrigerator Safely
Before attempting any reset on the ice maker of a Frigidaire side by side refrigerator, proper preparation reduces risks of electrical issues or water leaks. Begin by unplugging the unit and moving nearby items to create clear access to the controls and water lines. These steps establish a stable foundation for the rest of the repair process.
Safety steps protect both the appliance and the person performing the reset. Disconnecting power eliminates shock risk while panels are removed. Water supply shutoff prevents leaks during the procedure.
Turn off the refrigerator at the breaker. Close the water valve behind the unit. Clear ice from the bin to avoid spills once the maker is accessed.
Frigidaire Ice Maker Reset Button Access
Locating the reset button inside a Frigidaire side by side ice maker begins with removing the ice maker cover and identifying the small button near the control module. Careful handling of the surrounding wiring and components prevents accidental damage during this step. Once exposed the button becomes accessible for the reset procedure outlined in the guide.
The reset button sits behind the front cover of the ice maker assembly. Access requires removal of one or two screws that hold the cover in place. Once exposed the button is pressed and held to clear stored faults.
Remove the cover screws with the Phillips screwdriver. Pull the cover forward to expose the button.
Press and hold the reset button for five seconds until a click is heard. Reinstall the cover and restore power to test.
A single sentence warning applies here. Power must remain off until all panels are secured.
Frigidaire Thermistor Eye and Fan Fixes
Sensor faults often remain after the initial reset if the thermistor or optical eye is dirty. Cleaning these parts restores accurate readings and stops repeated error codes. Owners check the evaporator fan next because restricted airflow keeps the unit in harvest mode.
Wipe the optical eye with a dry cloth. Test the thermistor resistance with the multimeter at room temperature. Inspect the fan blades for ice buildup that blocks rotation.
Frigidaire Side by Side Ice Maker Replacement
Replacing the ice maker in a Frigidaire side by side refrigerator often becomes necessary once reset procedures no longer restore function. The task requires disconnecting power and water lines before removing the existing unit from its mounting bracket. A compatible replacement then installs in the same location to resume reliable ice production.
When the reset fails to restore function the entire ice maker assembly may need replacement. Frigidaire units use modular designs that allow swap out with basic tools. Matching the original part number ensures proper fit and wiring connections.
Unplug the wiring harness from the old unit. Remove the mounting screws that secure the assembly.
Slide the new maker into position and reconnect the harness. Run a test cycle to confirm harvest and fill operations.
Frigidaire Ice Maker Cycle Monitoring Steps
Before resetting the Frigidaire side by side ice maker, monitor its cycle to confirm the exact problem. Watch how the unit fills with water, freezes the cubes, and ejects them into the bin. These observations reveal whether the reset button will resolve the issue or if further steps are required.
Final verification confirms the reset produced lasting results. Owners monitor the first two cycles for proper fill volume and cube release. Temperature settings in the freezer section should remain at zero degrees Fahrenheit or lower.
Observe the fill tube for steady water flow. Check cube size after the second harvest. Listen for the auger motor during dispensing.
A single sentence verdict applies here. Successful reset returns normal ice output within four hours.
Hey, I’m Jake. I focus on cooling systems at Appliance Mastery, like fridges, freezers, and air conditioners.
I’ve worked in appliance repair for more than ten years and I’m certified through NASTeC. I’ve seen just about every fridge issue you can imagine.
My goal is to help you fix problems without stress. Whether it’s a freezer that won’t cool or an AC that keeps beeping, I’m here to walk you through it.