Solving the Samsung Washer Out of Balance Issue: Expert Tips for Optimal Performance

Common Causes of Samsung Washer Going Out of Balance

If you are experiencing your Samsung washer constantly going out of balance, there can be a few common causes behind this frustrating issue. Understanding these causes can help you troubleshoot and resolve the problem. Here are some possible reasons why your Samsung washer might be going out of balance:

  1. Improper loading: One common mistake that can lead to an imbalanced washer is overloading or unevenly distributing the laundry. Make sure to distribute the clothes evenly around the drum and try not to overload it. Additionally, avoid washing bulky items, such as comforters or heavy blankets, in a single load.
  2. Uneven floor: Another factor that can contribute to an imbalanced washer is an uneven or unstable floor. If your washing machine is not on a level surface, it can cause the drum to become unbalanced during the spin cycle. Use a level to check the surface and adjust the feet of the washer accordingly.
  3. Worn-out suspension rods: The suspension rods in your Samsung washer are responsible for keeping the drum stable. Over time, these rods can wear out or become loose, resulting in an imbalanced washer. If you suspect that the suspension rods are the problem, it may be necessary to replace them.
  4. Damaged or worn-out shock absorbers: Just like suspension rods, the shock absorbers in your washer play a crucial role in maintaining balance during the spin cycle. If these absorbers are damaged or worn out, they can cause excessive shaking and vibrating. Check these components and replace them if necessary.
  5. Malfunctioning control board: In some cases, a malfunctioning control board can be the culprit behind an imbalanced Samsung washer. The control board is responsible for regulating various functions, including the balance of the drum. If you suspect that the control board is faulty, it’s best to seek professional assistance for repair or replacement.

By identifying and addressing the common causes of a Samsung washer going out of balance, you can overcome this frustrating issue and enjoy a smoother laundry experience. Remember to follow the manufacturer’s guidelines for proper loading and maintenance to prevent future imbalances.

How to Check for an Unbalanced Load

When your Samsung washer is consistently going out of balance, it can be frustrating and time-consuming. However, by checking for an unbalanced load, you can identify and resolve the issue more effectively.

Here are a few steps you can take to check for an unbalanced load:

  1. Stop the cycle: Once you notice that the washer is out of balance, pause or stop the cycle. This will prevent any further damage to the washer and allow you to address the issue promptly.
  2. Open the washer: Carefully open the washer and remove any laundry that may be causing the imbalance. Inspect the load for any tangled or bunched-up items, as they can throw off the balance.
  3. Distribute the laundry: Evenly distribute the laundry in the washer drum. Make sure that no single item or cluster of clothing is concentrated in one area. This will help promote a more balanced load and reduce the risk of future imbalances.
  4. Check for large items: If you’re washing larger items, such as blankets or comforters, they may cause the washer to go out of balance. Consider washing these items separately or with smaller, similar-weight items to maintain a balanced load.
  5. Restart the cycle: After redistributing the laundry, close the washer door and restart the cycle. Monitor the washer carefully to ensure that it runs smoothly and without any imbalance issues.

Click here to preview your posts with PRO themes ››

By following these steps and checking for an unbalanced load in your Samsung washer, you can effectively address the issue and prevent future imbalances. This will help ensure a smoother laundry experience and prolong the lifespan of your washer.

Remember, a balanced load is crucial for the proper functioning of your washer, so always take the time to distribute the laundry evenly before starting a cycle.

Adjusting the Leveling Feet on Your Samsung Washer

If your Samsung washer is constantly going out of balance, one possible reason could be an uneven floor. Even a slight incline or unevenness in the floor can disrupt the washer’s balance. To resolve this issue, you can try adjusting the leveling feet on your Samsung washer.

Here are the steps you can follow to adjust the leveling feet on your Samsung washer:

  1. Locate the leveling feet: The leveling feet are typically located at the bottom corners of the washer. You may need to tilt the washer slightly to see them.
  2. Use a wrench: Get a wrench that fits the size of the leveling feet. This will allow you to loosen or tighten the feet as needed.
  3. Adjust the leveling feet: Turn the leveling feet clockwise to raise them and counterclockwise to lower them. Use a level to check the balance of the washer after each adjustment. It may take a few tries to achieve an evenly leveled washer.
  4. Check the washer’s balance: Once you have adjusted the leveling feet, place a level on top of the washer to ensure that it is perfectly level. If it still appears unbalanced, continue adjusting the feet until it is level.

Keep in mind that it’s important to have the washer on a level surface to ensure its proper functioning and to prevent it from going out of balance. Adjusting the leveling feet can help you find the optimal balance for your Samsung washer, reducing the chances of it going out of balance during a laundry cycle.

Click here to preview your posts with PRO themes ››

Remember to check the washer’s balance periodically, especially if you have recently moved the washer to a different location. By keeping your Samsung washer level, you can enjoy a smoother laundry experience and prolong the lifespan of your appliance.

Ensuring Proper Loading of the Samsung Washer

To prevent your Samsung washer from going out of balance all the time, it is crucial to ensure proper loading. Incorrectly loading the washer is one of the common causes of imbalance. Here are a few guidelines to follow when loading your Samsung washer:

  1. Distribute the laundry evenly: Uneven distribution of laundry inside the washer can create an imbalance during the spin cycle. Make sure to distribute the clothes evenly around the tub. Avoid piling up all the heavy items on one side. Instead, mix large and small items throughout the load.
  2. Avoid overloading the washer: Overloading the washer not only causes strain on the motor and other components, but it also leads to imbalance issues. Follow the recommended load capacity mentioned in the user manual to prevent overloading. This will ensure that the load can wash and spin properly without causing imbalance.
  3. Check for large items: Before starting the wash cycle, make sure to check for any large items or bulky bedding that could disrupt the balance. If you find any, remove them from the load and wash them separately. This will reduce the chances of the washer going out of balance.

Remember, proper loading is essential for the washer to function optimally. By distributing the laundry evenly, avoiding overloading, and checking for large items, you can minimize the risk of imbalance and ensure a smoother washing experience with your Samsung washer.

Without a proper loading technique, even the most advanced washer like Samsung may struggle to maintain balance. So, make sure to follow these guidelines to keep your laundry cycles trouble-free.

How to Calibrate the Samsung Washer

Calibrating your Samsung washer is an important step to ensure optimal performance and prevent the appliance from going out of balance. Here are a few steps to guide you through the calibration process:

  1. Level the washer: Start by making sure that your washer is on a level surface. Uneven floors can contribute to imbalance issues. Use a bubble level to check the surface and adjust the feet of the washer if necessary. A well-leveled washer will help distribute the weight evenly, reducing the chances of it going out of balance.
  2. Empty the drum: Take out any laundry that may be in the washer. It’s important to calibrate the machine without any clothes to get accurate results.
  3. Select the calibration mode: Press and hold the Start/Pause button for around three seconds to activate the calibration mode. This mode helps the washer recalibrate and adjust its settings to the optimal level.
  4. Run the calibration cycle: Once the calibration mode is activated, the washer will automatically run a calibration cycle. This process usually takes a few minutes to complete. During this time, the machine will adjust the spin speed, water levels, and other parameters to ensure a balanced load.

Click here to preview your posts with PRO themes ››

That’s it! Following these steps will help you calibrate your Samsung washer effectively. Remember, a properly calibrated washer will provide a smoother and more efficient washing experience.

Now that you’ve learned how to calibrate your Samsung washer, let’s move on to other tips and tricks to prevent it from going out of balance.


By following the additional guidelines provided in this article, you can ensure that your Samsung washer is properly calibrated and operates smoothly. Leveling the washer on a flat surface, emptying the drum before calibration, selecting the calibration mode, and running the calibration cycle are all essential steps for preventing imbalance and maintaining optimal performance.

A balanced washer not only prevents excessive noise and vibrations but also helps to extend the lifespan of the machine. By taking the time to calibrate your Samsung washer, you can avoid potential issues such as clothes not being cleaned properly or the washer becoming damaged due to excessive shaking.

Remember, regular calibration is necessary to keep your washer running efficiently. By incorporating these simple steps into your washing routine, you can enjoy hassle-free laundry days and ensure that your Samsung washer continues to provide you with outstanding performance for years to come.

Frequently Asked Questions

Q: Why is it important to calibrate a Samsung washer?

A: Calibrating a Samsung washer is important because it ensures optimal performance and prevents imbalance during the washing cycle.

Q: How can I calibrate my Samsung washer?

A: To calibrate your Samsung washer, start by leveling it on a flat surface. Empty the drum before calibration, select the calibration mode, and run the calibration cycle.

Q: What are the benefits of calibrating a Samsung washer?

A: Calibrating a Samsung washer results in a properly balanced machine, leading to better performance, reduced vibration, and a smoother washing experience.

Q: How often should I calibrate my Samsung washer?

A: It is recommended to calibrate your Samsung washer at least once a year to maintain optimal performance and prevent imbalance issues.

Q: Can I calibrate my Samsung washer if it’s already installed?

A: Yes, you can calibrate your Samsung washer even if it’s already installed. Just ensure that it is leveled on a flat surface and follow the calibration steps provided.

Q: Will calibrating my Samsung washer void the warranty?

A: No, calibrating your Samsung washer will not void the warranty as long as you follow the manufacturer’s instructions and guidelines provided in the user manual.

Charlie Thomson

Charlie Thomson is Appliance Mastery's expert on laundry appliances. With a degree in mechanical engineering and over 8 years of experience in the appliance repair industry, Charlie is a go-to resource for homeowners who want to tackle common issues with their washing machines, dryers, and dishwashers.

Leave a Comment

Send this to a friend