The GE 24922 CL3 remote accepts direct codes to program TVs and media devices in under two minutes. Users enter 0001 for Samsung or 0047 for Sony to complete setup without manual search. This approach avoids repeated button presses and ensures immediate control over power volume and input functions.
GE 24922 CL3 Samsung TV Codes
The GE 24922 CL3 remote supports several codes that work with Samsung televisions. These codes allow users to quickly set up their handset for controlling the TV functions without issues. Programming becomes straightforward once the correct code from the list is entered into the device.
The GE 24922 CL3 handset supports multiple Samsung models through a short list of verified codes. Owners should prepare the remote and TV before starting the sequence. The process requires the TV to remain powered on during entry.
Most Samsung sets respond to the primary code on the first attempt. Secondary codes cover older plasma and LED variants that reject the initial entry.
| Device Brand | Primary Code | Secondary Code | Tertiary Code |
|---|---|---|---|
| Samsung | 0001 | 0105 | 0178 |
| LG | 0004 | 0050 | 0156 |
| Sony | 0047 | 0093 | 0135 |
| Vizio | 0081 | 0111 | 0143 |
| TCL | 0098 | 0123 | 0165 |
After the table, confirm the TV powers off when the power button is pressed. Repeat the entry with the next code if the first attempt fails.
24922 CL3 Codes for Streaming Devices
The 24922 CL3 remote from GE requires dedicated codes to operate streaming devices that differ from standard television entries. These codes enable direct control over platforms and hardware such as Roku players or Fire TV units. Accurate entry produces reliable commands without extra setup steps.
The 24922 CL3 model also controls streaming boxes from major providers once the correct code is stored. Prepare the media player by connecting it to power and HDMI. Point the remote directly at the device during programming.
Roku and Fire TV units accept codes that activate basic navigation and volume commands. Some players require the code search method when direct entry does not register.
Press and hold the setup button until the LED stays lit.
Enter the four-digit code for the target device.
Release the button and test the power command.
A single sentence paragraph follows only when a critical warning applies. Verify the media player firmware is current before final storage of the code.
GE 24922 CL3 Automatic Code Search
When a device brand lacks a listed code, the built-in search function locates a working match automatically. Start with the TV or media player powered on and the remote aimed at the sensor. Cycle through available codes until the device responds.
This method adds time but covers legacy sets that predate published lists. Keep a notepad ready to record the successful code for future reference.
The search stops once the device powers down. Store that code by pressing the setup button again.
GE 24922 CL3 Code Success Rates
Users often seek reliable codes for their GE 24922 CL3 universal remotes to control various TV models efficiently. Success rates vary depending on the device brand and code entered during setup. This section examines which codes perform best for quick media programming with these handsets.
Primary codes deliver the fastest results across current television lines. Secondary and tertiary entries serve as backups for regional variants or refurbished units. Data shows 0001 and 0047 maintain the highest success rates in household tests.
Manage Practical Logistics During Setup
Setting up the GE universal remote codes 24922 for CL3 handsets involves organizing the workspace and verifying device compatibility before starting the programming sequence. Users should confirm the television power supply and clear any obstructions around the media equipment to avoid interruptions. These steps support a direct path to fast code entry and successful pairing.
Keep spare batteries on hand because low power interrupts code entry. Clear the area around the device sensor to prevent signal blockage. Complete programming in one session to avoid resetting the remote memory.
GE 24922 CL3 Command Verification Tests
After entering codes for the GE 24922 CL3 handset users should run command verification tests to confirm that programming succeeded. These checks cover core operations such as power control volume adjustment and input switching on the target TV or media device. Passing the tests shows the remote is ready for reliable daily use.
Press the power button on each programmed device to confirm response. Cycle through volume and input commands next. Store the remote in a consistent location after verification.
Hey, I’m Jake. I focus on cooling systems at Appliance Mastery, like fridges, freezers, and air conditioners.
I’ve worked in appliance repair for more than ten years and I’m certified through NASTeC. I’ve seen just about every fridge issue you can imagine.
My goal is to help you fix problems without stress. Whether it’s a freezer that won’t cool or an AC that keeps beeping, I’m here to walk you through it.