The GE Universal Remote 24922 CL3 handsets program TVs fast with specific three digit codes. Users select the matching code for their television brand and enter it during the remote setup sequence.
This method eliminates the need for original remotes and works across many popular TV manufacturers. The data aggregator approach compiles all known codes into one reference point for quick access during initial programming or resets. Owners keep the table nearby to test alternatives when the first code fails to respond.
GE 24922 CL3 TV Brand Codes
The master data table compiles verified codes for the GE Universal Remote 24922 CL3 across common television brands. Owners consult this table before starting the programming process to identify the right sequence for their device. Multiple codes per brand account for variations in TV models and production years. Testing codes in order increases the chance of successful pairing on the first attempt. Additional codes cover less common brands that still appear in households.
| Television Brand | Primary Code | Secondary Code | Tertiary Code |
|---|---|---|---|
| Samsung | 010 | 012 | 018 |
| LG | 005 | 009 | 015 |
| Sony | 002 | 006 | 019 |
| Vizio | 004 | 008 | 017 |
| TCL | 011 | 013 | 020 |
| Panasonic | 007 | 014 | 021 |
GE 24922 CL3 Codes by TV Brand
Top tier analysis shows that primary codes succeed more often on newer television sets while secondary options handle older models better. Samsung entries cluster around lower numbers because of shared manufacturing protocols. LG codes require careful timing during entry to avoid reset loops in the remote. Cross reference the table with the TV model year before testing to reduce failed attempts. Data patterns indicate that Vizio and TCL share overlapping sequences due to component suppliers.
Owners should record which code works for future resets. This practice prevents repeated searches through the full list.
GE 24922 CL3 Multi Device Setup Rules
Practical logistics require owners to program one device at a time to avoid signal interference between units. Keep fresh batteries installed in the GE Universal Remote 24922 CL3 before any session begins. Position the remote within three feet of the television during code entry for reliable transmission. Clear the area of other remotes that might send conflicting infrared signals. Store the master data table in a phone note for quick reference during travel or moves.
Multiple device setups benefit from labeling each programmed remote. This step maintains organization across living rooms and bedrooms.
GE 24922 CL3 Samsung TV Codes
Samsung television sets respond to the GE Universal Remote 24922 CL3 when the primary code is entered first. Turn on the television manually then press and hold the setup button until the indicator light stays lit. Release the button and input the three digit code from the table. The light should turn off to confirm acceptance. Point the remote at the screen and test the power function immediately.
If the primary code fails repeat the sequence with the secondary option. Owners must wait five seconds between attempts to clear the remote buffer.
GE 24922 CL3 Codes for LG TVs
LG display units accept the GE Universal Remote 24922 CL3 codes after the remote enters setup mode correctly. Activate the television power button by hand and aim the remote directly at the sensor. Enter the selected code without pauses between digits. Observe the indicator light for the off signal that marks success. Verify volume control next to confirm full functionality.
Secondary codes prove useful on LG models from different production batches. Test each option in sequence until response occurs.
GE 24922 CL3 Button Response Checks
Owners must press power volume and input buttons on the GE Universal Remote 24922 CL3 after every successful code entry. Confirm that all tested functions operate the television without lag or missed signals. Repeat the full setup if any button fails to respond during verification.
Hey, I’m Jake. I focus on cooling systems at Appliance Mastery, like fridges, freezers, and air conditioners.
I’ve worked in appliance repair for more than ten years and I’m certified through NASTeC. I’ve seen just about every fridge issue you can imagine.
My goal is to help you fix problems without stress. Whether it’s a freezer that won’t cool or an AC that keeps beeping, I’m here to walk you through it.