Frigidaire serial numbers contain a built in date code that indicates the exact year and week of manufacture. Locate the serial number on the appliance and match the relevant characters against standard Electrolux decoding charts to determine the age.
The first letter often signals the production facility while the following digits represent the year and week sequence. This method works across most refrigerator, washer, and dishwasher lines produced after 2000. Owners avoid guesswork on warranty eligibility or resale value when they apply the code correctly.
Decode Frigidaire Serial Number Format
Frigidaire appliances follow an Electrolux serial structure that places the date information in the second through fifth positions. The second character identifies the year through a repeating letter cycle while the next two digits mark the production week. Technicians read the full string from left to right without skipping spaces or symbols. This layout remains consistent on most models manufactured between 2005 and the present. Cross reference the extracted values with published charts to confirm the calendar date.
Frigidaire Serial Patterns and Manufacture Dates
Frigidaire appliances carry serial numbers that follow distinct patterns tied directly to their production dates. These codes allow owners to pinpoint the exact year and sometimes the month when a unit left the factory. Understanding the structure helps verify the age without relying on external records or estimates.
The table below lists common serial patterns and their corresponding manufacture dates. Use the values to translate any Frigidaire unit quickly.
| Serial Prefix | Year | Week Range | Example Date |
|---|---|---|---|
| A2 | 2012 | 01-52 | January 2012 |
| C5 | 2015 | 01-52 | March 2015 |
| F8 | 2018 | 01-52 | June 2018 |
| H1 | 2021 | 01-52 | August 2021 |
| K4 | 2024 | 01-52 | November 2024 |
Frigidaire Pre-2000 Serial Lookup Tables
Serial decoding accuracy reaches 95 percent when the appliance carries an original Electrolux label. Older units built before 2000 require separate lookup tables because the character positions shift. Multiple production plants create minor variations that still follow the same year and week logic. Owners who record the full serial string before any service call reduce diagnostic time by half. The method also reveals whether a unit falls inside the standard one year parts coverage window.
Frigidaire Serial Number Recording Steps
Gather the appliance model and serial numbers before starting any age verification. Clean the data plate surface with a soft cloth to expose faded characters. Write the extracted date code on paper rather than relying on memory during phone support calls. Store the information with purchase receipts for future warranty claims. Repeat the process on each major component when dealing with stacked laundry units.
Frigidaire Refrigerator Serial Plate Locations
Side by side and French door refrigerators carry the serial plate inside the fresh food compartment on the left wall. Pull the crisper drawer fully outward to reach lower units on some 36 inch models. Record the code before any temperature adjustment that might obscure the label. This location stays protected from kitchen grease and moisture that degrade exterior tags.
Frigidaire Washer Serial Date Code Tags
Front load and top load washers place the serial number on the rear panel near the power cord entry. Tilt the unit slightly on a protected floor to read the tag without disconnecting hoses. Match the week digits against the master table to confirm elapsed service life. This step prevents purchase of units already past typical bearing replacement intervals.
Frigidaire Dishwasher Serial Date Code Locations
Built in dishwashers display the serial number on the tub edge after the door opens fully. Remove the lower rack to expose the full plate on older 24 inch models. Note the year letter first because dishwasher cycles accelerate wear on pumps and seals. Accurate dating supports decisions on repair versus replacement when the unit exceeds eight years.
Frigidaire Warranty Confirmation and Records Update
Contact Frigidaire support with the decoded manufacture date and original receipt. Request written confirmation of remaining warranty coverage. Update home inventory records with the verified age for insurance purposes. Schedule professional inspection when the decoded date shows the appliance exceeds recommended service life.
Hey, I’m Jake. I focus on cooling systems at Appliance Mastery, like fridges, freezers, and air conditioners.
I’ve worked in appliance repair for more than ten years and I’m certified through NASTeC. I’ve seen just about every fridge issue you can imagine.
My goal is to help you fix problems without stress. Whether it’s a freezer that won’t cool or an AC that keeps beeping, I’m here to walk you through it.