The GE 8 Device Universal Remote Control Backlit Black 41567 relies on a compiled list of manufacturer codes to control multiple electronics at once. The master data table below supplies the primary codes for common devices along with entry procedures.
Owners locate the correct sequence by matching their equipment brand to the listed options and testing until the device responds. This aggregation covers frequent categories and reduces trial time during initial setup.
GE 41567 Master Data Table
The master data table organizes codes by device category and brand for the GE remote model 41567. This structure allows users to locate entries rapidly without scanning entire manuals. Codes vary by manufacturer and sometimes require testing multiple options. The table focuses on popular brands to cover most household setups. Additional rows address audio and video components that pair with the backlit keypad.
| Device Type | Brand Example | Primary Code | Secondary Code | Tertiary Code |
|---|---|---|---|---|
| Television | Samsung | 0101 | 0812 | 0702 |
| Television | Sony | 0000 | 0111 | 0302 |
| DVD Player | Panasonic | 0437 | 0950 | 0175 |
| Audio Receiver | Yamaha | 0177 | 0185 | 1077 |
| Cable Box | Motorola | 0477 | 0277 | 0877 |
| Satellite Receiver | DirecTV | 0392 | 0566 | 0639 |
Programming GE 41567 for Multiple Devices
Users begin programming the GE 8 Device Universal Remote Control Backlit Black 41567 by pressing and holding the setup button until the indicator light activates. They then select the device button that matches the target equipment and enter the three or four digit code from the master data table. The light turns off once the code registers correctly. Repeat the sequence for each additional device up to the eight device limit. Test the power and volume functions after each successful entry to confirm control.
Locate the device category in the master data table first.
Press and hold the corresponding device button on the remote.
Enter the listed code within ten seconds of the light staying on.
Verify operation by pressing the power button on the target device.
GE 41567 High Frequency Television Codes
High frequency codes appear first in each device row because they match the largest number of units sold in recent years. Lower tier codes serve older models or regional variants that require extra attempts during setup. The GE 8 Device Universal Remote Control Backlit Black 41567 accepts both three digit and four digit formats depending on the brand entry. Analysis shows television codes dominate the list because they represent the most common primary device paired with this remote.
Maintaining GE 41567 Printed Code Tables
Owners store a printed copy of the master data table near the entertainment center for quick reference during battery changes. The backlit feature on the GE 8 Device Universal Remote Control Backlit Black 41567 drains power faster than non lit models so fresh batteries prevent code loss mid programming. Keep the original manual as backup when the table does not list a rare brand. Update the table entries whenever new devices enter the household to maintain full eight device coverage.
Troubleshooting GE 41567 Setup Failures
Persistent setup failures on the GE 8 Device Universal Remote Control Backlit Black 41567 usually trace to an incorrect code or a device that needs a different entry method. Clear the current code by repeating the setup sequence with 9999 and then try the next code in the row. Confirm the remote sits within three feet of the device during testing to avoid signal interference. Replace batteries if the indicator light dims during code entry.
The final verdict for persistent issues remains a full factory reset of the remote before re entering all codes from the master data table.
GE 41567 Backlit Remote Battery Swap
Remove the battery cover on the back of the GE 8 Device Universal Remote Control Backlit Black 41567 by sliding it downward. Insert two fresh AA batteries while matching the polarity marks inside the compartment. Replace the cover until it clicks into place and test the backlight by pressing any button in low light. Reprogram any devices that lost their codes during the battery swap using the master data table.
Ordering Replacement GE 41567 Remotes
Search local electronics retailers for the exact GE 8 Device Universal Remote Control Backlit Black 41567 model number. Compare the button layout and backlight feature against the current unit before purchase. Program the new remote immediately with the same master data table codes to restore full functionality across all eight devices.
Hey, I’m Jake. I focus on cooling systems at Appliance Mastery, like fridges, freezers, and air conditioners.
I’ve worked in appliance repair for more than ten years and I’m certified through NASTeC. I’ve seen just about every fridge issue you can imagine.
My goal is to help you fix problems without stress. Whether it’s a freezer that won’t cool or an AC that keeps beeping, I’m here to walk you through it.