GE universal remotes control Samsung Smart TVs with codes such as 0105, 0077, and 0098. Samsung soundbars respond to codes including 0219, 0380, and 0421 after proper entry.
These values come from aggregated manufacturer lists and allow direct volume, power, and input commands without additional hubs. Users should test each code in sequence during setup to confirm full functionality across both device types.
Access GE Universal Remote Code Lists
GE publishes consolidated code sets for multiple brands in the remote manual and online support files. Samsung Smart TVs and soundbars appear in dedicated sections that list four-digit entries for direct programming. Review the full list before starting because older remotes may require different sequences than newer models. Cross-reference the device model year with the code chart to avoid mismatches during initial setup.
Enter Codes for Samsung Smart TVs
Locate the code list inside the GE remote packaging or download the current version from the support site. Turn on the Samsung Smart TV and point the remote at the device. Press and hold the setup button until the indicator light stays on. Enter the first code from the TV section such as 0105. The light should turn off if accepted. Test power and volume buttons to verify control.
Configure Soundbar Control with GE Remotes
Soundbar programming follows the same button sequence but uses audio-specific codes. Switch the remote mode to AUX or Soundbar if available on the model. Enter 0219 first and check mute and volume response on the Samsung soundbar. Repeat with 0380 if the initial code fails to register all functions. Keep the remote aimed steadily during entry to prevent signal interruption.
GE Codes for Samsung TVs and Soundbars
Users can program their GE universal remote to work with Samsung smart TVs and soundbars by entering the appropriate codes. This section lists the codes needed for various models to ensure proper connectivity. Accurate code selection prevents issues during the setup process.
The table below aggregates common codes from GE documentation for Samsung devices. Test codes in order until the remote responds correctly.
| Device Type | Code Option 1 | Code Option 2 | Code Option 3 | Code Option 4 |
|---|---|---|---|---|
| Samsung Smart TV | 0105 | 0077 | 0098 | 0178 |
| Samsung Soundbar | 0219 | 0380 | 0421 | 0490 |
GE 0105 TV and 0219 Soundbar Codes
Code 0105 registers Samsung TVs more reliably across 2018 through 2022 model years than later entries. Soundbar code 0219 supports basic volume and power on most Samsung models released after 2020. Users report fewer retries with these primary options during initial programming. Secondary codes serve as backups when the first attempt produces no response from the device.
GE Remote Preparation for Samsung Code Entry
Prepare fresh batteries in the GE remote before beginning code entry. Position the Samsung TV and soundbar within direct line of sight to reduce signal blockage. Clear any obstructions between the remote and devices during testing. Record which code works for each unit to speed future reprogramming after battery changes.
GE Remote Samsung TV Soundbar Code Fixes
Clear the remote memory by holding setup and the mute button together for ten seconds if codes do not register. Restart the Samsung Smart TV and soundbar to reset their receivers. Try the next code in the table immediately after a failed attempt. Persistent issues may require checking for remote model compatibility with the specific Samsung firmware version.
GE Codes Verification for Samsung TV Soundbar
Test all major functions including power toggle, volume adjustment, and input selection on both the Samsung Smart TV and soundbar. Save the working code in a note for reference during future resets. Replace the remote batteries annually to maintain consistent performance.
Hey, I’m Jake. I focus on cooling systems at Appliance Mastery, like fridges, freezers, and air conditioners.
I’ve worked in appliance repair for more than ten years and I’m certified through NASTeC. I’ve seen just about every fridge issue you can imagine.
My goal is to help you fix problems without stress. Whether it’s a freezer that won’t cool or an AC that keeps beeping, I’m here to walk you through it.