Troubleshooting Guide: Maytag Washer Not Draining or Spinning

Common Reasons for Maytag Washer Not Draining or Spinning

If you’re experiencing issues with your Maytag washer not draining or spinning, there are a few common reasons why this might be happening. Understanding these causes can help you diagnose and resolve the problem quickly. Here are some possible culprits to consider:

  1. Clogged drain hose: A clogged drain hose is one of the most frequent causes of drainage issues in a Maytag washer. Over time, debris, lint, and other particles can accumulate in the hose, obstructing the flow of water. To check for a clogged drain hose, follow these steps:
  • Disconnect the washer from the power source.
  • Locate the drain hose at the back of the machine and detach it from the drain pipe or wall.
  • Inspect the hose for any clogs by using a flashlight or running water through it.
  • If you find any obstructions, clear them by using a plumber’s snake or flushing water through the hose with force.
  1. Blocked pump: The pump in your Maytag washer plays a crucial role in draining water from the tub. If the pump becomes clogged or damaged, it can prevent the washer from draining properly. To check the pump for blockages:
  • Unplug the washer and remove any standing water from the tub.
  • Access the pump by opening the washer’s back panel or bottom panel, depending on the model.
  • Inspect the pump for any debris, such as coins, lint, or fabric.
  • Remove any obstructions carefully and ensure the pump’s impeller is free to rotate.
  1. Faulty lid switch: The lid switch is responsible for detecting whether the washer lid is closed during the cycle. If the lid switch is malfunctioning, it can prevent the washer from draining or spinning. To test the lid switch:
  • Disconnect the washer from the power source.
  • Locate the lid switch, typically found under the washer’s top panel.
  • Use a multimeter to test the continuity of the lid switch while the lid is closed.
  • If there is no continuity, the lid switch may need to be replaced.

Remember, these are just a few of the common reasons why your Maytag washer may not be draining or spinning. If these troubleshooting steps don’t resolve the issue, it may be best to consult a professional technician for further assistance.

Clogged Drain Hose or Pump

If your Maytag washer is not draining or spinning, one of the common culprits could be a clogged drain hose or pump. When the drain hose or pump gets clogged, it prevents the water from draining out of the machine or the spinning function from operating properly. Luckily, you can easily troubleshoot this issue on your own.

First, you’ll need to unplug the washer from the power source and turn off the water supply. This will ensure your safety while you inspect and resolve the problem.

Checking the Drain Hose

The drain hose is responsible for carrying the water out of the washer and into the drain. Over time, the hose can become clogged with debris or small objects. Here’s what you need to do:

  1. Locate the drain hose at the back of the washer. It is typically connected to a standpipe or a laundry sink.
  2. Remove the hose from the standpipe or sink. Place a bucket or towel underneath to catch any water that may spill out.
  3. Inspect the hose for any clogs or blockages. Use a flashlight to see if there are any visible obstructions.
  4. Clear the clog by either removing the debris manually or using a long, flexible brush to dislodge it.
  5. Reattach the drain hose securely to the standpipe or sink.

Checking the Pump

If the drain hose is clear, the next step is to check the pump itself. The pump is responsible for pumping the water out of the washer during the draining process. Here’s how to proceed:

  1. Locate the pump at the bottom of the washer. It is often found behind a small access panel or at the back of the machine.
  2. Remove any obstructions that may be blocking the pump. Look for debris, loose objects, or tangled clothes that could be preventing proper functioning.
  3. Inspect the pump impeller. Make sure it spins freely and is not damaged or worn out.
  4. Check the pump belt if your model has one. Ensure that it is not loose, broken, or worn out.
  5. Reassemble the pump and access panel, ensuring everything is properly secured.

Faulty Lid Switch

If your Maytag washer is not draining or spinning, another common culprit could be a faulty lid switch. The lid switch is a safety feature that prevents the washer from operating when the lid is open. If the switch is not functioning properly, it can disrupt the draining and spinning cycles.

To troubleshoot the lid switch, you’ll need to access it. Start by unplugging the washer from the power outlet. Then, locate the switch, which is usually located near the top or side of the washer tub, underneath the lid. You may need to remove the control panel or top cover of the washer to access it.

Once you have access to the lid switch, there are a few ways to test if it’s faulty. One method is to visually inspect the switch for any physical damage or loose connections. If you notice any issues, it’s likely that the switch needs to be replaced.

Another way to test the lid switch is to use a multimeter. Set the multimeter to the continuity or ohms setting, and disconnect the electrical wires leading to the switch. Place one lead of the multimeter on each terminal of the switch, and then open and close the washer lid. If the multimeter displays a reading of infinity when the lid is open and continuity (or close to zero ohms) when the lid is closed, then the lid switch is working properly. If there is no change in the multimeter reading, the switch is faulty and needs to be replaced.

If you determine that the lid switch is indeed faulty, you can purchase a replacement switch from a reputable appliance parts supplier. Once you have the new switch, carefully disconnect the old switch and connect the new one in its place. Make sure to follow the manufacturer’s instructions or refer to the washer’s manual for proper installation.

Remember to always prioritize the safety of yourself and others when working with electrical appliances. If you’re unsure about any aspect of troubleshooting or replacing the lid switch, it’s best to consult a professional technician to avoid any potential hazards.

Now that we have discussed the possibility of a faulty lid switch, let’s move on to the next section to explore further troubleshooting steps to get your Maytag washer back in working order.

Diagnosing the Issue

When your Maytag washer is not draining or spinning, it can be frustrating and inconvenient. However, before you can fix the problem, you need to identify the root cause. There are a few common issues that could be causing this problem, and by following these steps, you’ll be able to diagnose the issue and get your washer back to working order.

1. Check for a Clogged Drain Hose

A clogged drain hose is often the culprit behind a washer not draining properly. Start by unplugging your washer and moving it away from the wall. Locate the drain hose, which is typically connected to the back of the machine. Inspect the hose for any signs of blockage, such as debris or lint. If you notice any obstructions, use a long brush or pipe cleaner to remove them. Once the hose is clear, reattach it securely and ensure it is not kinked or twisted.

2. Inspect the Pump for Blockages

A blocked pump can also prevent your Maytag washer from draining properly. To access the pump, you may need to remove the front or back panel of the washer, depending on the model. Once you have access to the pump, visually inspect it for any debris or foreign objects that may be obstructing its function. Carefully remove any blockages you find, being mindful not to damage the pump in the process. Once the pump is clear, reassemble the washer and test it to see if it is now draining properly.

3. Test the Lid Switch

A faulty lid switch can cause your Maytag washer to not spin. Start by locating the lid switch, which is usually found near the door frame or under the lid. Visually inspect the switch for any signs of damage or wear. If the switch appears to be in good condition, you can test its functionality using a multimeter. Set the multimeter to the continuity setting and connect the probes to the switch terminals. With the lid closed, the meter should show continuity. If it does not, the lid switch is faulty and needs to be replaced.

Resolving the Issue

To resolve the issue of your Maytag washer not draining or spinning, there are a few troubleshooting steps that you can take. By following these steps, you can identify and fix the problem, saving you time and money on professional repairs.

  1. Check for a Clogged Drain Hose: Start by inspecting the drain hose, which is responsible for removing the water from your washer. Ensure that it is not bent or blocked, as this can prevent water from draining properly. If you find any obstructions, remove them and test the washer again.
  2. Inspect the Pump for Blockages: If the drain hose is not the issue, the next step is to check the pump for any blockages. Locate the pump, which is usually at the bottom of the washer. Look for any debris or foreign objects that may be causing a blockage. Clear out any obstructions and try running the washer again.
  3. Test the Lid Switch: A faulty lid switch can also cause your washer to not drain or spin. This switch is designed to prevent the washer from operating when the lid is open. To test the lid switch, access it by removing the top or front panel of the washer, depending on the model. Once you have access, visually inspect the lid switch for any damage or signs of wear. If it appears to be damaged, you’ll need to replace it.
  4. Use a Multimeter to Test the Lid Switch: To determine if the lid switch is functioning properly, you can use a multimeter. Set the multimeter to the continuity or ohms setting and test the switch by attaching the multimeter probes to the switch terminals. If the meter shows no continuity when the lid is closed and continuity when the lid is open, then the lid switch is faulty.
  5. Purchase and Install a Replacement Switch: If the lid switch is indeed faulty, you can purchase a replacement from a local appliance store or online. Make sure to get the correct model that is compatible with your Maytag washer. Once you have the replacement switch, follow the instructions provided with it to safely and properly install it.

Conclusion

By following the troubleshooting steps outlined in this article, you should be able to resolve the issue of your Maytag washer not draining or spinning. Remember to start by checking for a clogged drain hose and removing any obstructions. Next, inspect the pump for blockages and clear them out if necessary. Finally, test the functionality of the lid switch using a multimeter and consider purchasing a replacement switch if needed.

It’s important to diagnose the problem accurately before attempting any repairs. This will save you time and ensure that you’re addressing the root cause of the issue. By following the specific steps provided in this article, you can confidently troubleshoot and resolve the problem with your Maytag washer.

If you’re still experiencing difficulties after trying these troubleshooting methods, it may be best to consult a professional technician. They have the expertise and knowledge to identify and fix more complex issues with your washer.

Remember to always prioritize safety and follow the manufacturer’s instructions when working on your appliance.

Frequently Asked Questions

Q: Why is my Maytag washer not draining or spinning?

A: Your Maytag washer may not be draining or spinning due to a clogged drain hose. It is recommended to check the drain hose for any obstructions and remove them if found.

Q: How do I check and clear blockages in the pump?

A: To check for blockages in the pump, you need to locate the pump and inspect it for any obstructions. If you find any blockages, clear them out carefully using appropriate tools.

Q: What should I do if the lid switch is damaged?

A: If the lid switch of your Maytag washer is damaged, you can use a multimeter to test its functionality. If it fails the test, consider purchasing a replacement lid switch and install it following the provided instructions.

Q: Is it important to diagnose the issue before attempting to fix it?

A: Yes, it is crucial to diagnose the issue with your Maytag washer before attempting any fixes. Troubleshooting steps can vary based on the problem, and identifying the root cause will help you follow the correct steps for resolving the issue effectively.

Q: Are there specific steps for each troubleshooting method?

A: Yes, there are specific steps for each troubleshooting method mentioned in the article. The article provides detailed instructions on how to check the drain hose, clear pump blockages, test the lid switch, and install a replacement if needed. Following these steps carefully will help you resolve the issue with your Maytag washer.

Charlie Thomson is Appliance Mastery's expert on laundry appliances. With a degree in mechanical engineering and over 8 years of experience in the appliance repair industry, Charlie is a go-to resource for homeowners who want to tackle common issues with their washing machines, dryers, and dishwashers.

SEE ALSO
Troubleshooting Steps to Clear 4E Code on Samsung Washer

Leave a Comment

Send this to a friend